Product ID:DENSFIL OBUTURATORS (TITANIUM WIRE CORE),669297
MSDS Date:09/20/1995
FSC:6520
NIIN:01-384-5548
Kit Part:Y
MSDS Number: CDMPM

Emergency Phone: 302-422-4511/800-424-9300(CHEMTREC)

Info Phone: 302-422-4511/800-532-2855

Cage: 11107

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

NON-HAZARDOUS INGREDIENTS

Fraction By Weight: 100%

LD50 LC50 Mixture:LD50 (ORAL, RAT) IS UNKNOWN.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:NONE. ACUTE AND CHRONIC-
MAY PRODUCE IRRITATING VAPORS IF BURNED, CAUSING WATERY EYES &
COUGHING. MOLTEN POLYMER CAN BURN SKIN. INGESTION OF LARGE AMOUNTS
MAY BE HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:NONE
Medical Cond Aggravated by Exposure:NONE

First Aid:CALL PHYSICIAN IF SYMPTOMS PERSIST. SKIN:IN CASE OF BURNS
CAUSED BY SKIN CONTACT WITH MOLTEN MATERIAL, TREAT USING THERMAL
BURN PROCEUDRES/COOL RAPIDLY WITH COLD WATER. INHALED:REMOVE TO
FRESH AIR. EY ES:FLUSH WITH PLENTY OF WATER. ORAL:IF CONSCIOUS,
DRINK TWO GLASSES OF WATER TO DILUTE. SEEK MEDICAL ATTENTION.

Flash Point:NONE
Lower Limits:NOT RELEVANT
Upper Limits:NOT RELEVANT
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:AS WITH ANY FIRE, WEAR PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS TO AVOID
INHALATION OF HAZARDOUS DECOMPOSTION PRODUCTS.

Spill Release Procedures:SWEEP UP AND PLACE IN DISPOSAL CONTAINER.
Neutralizing Agent:NOT RELEVENT

Handling and Storage Precautions:NO SPECIAL PRECAUTION IS NEEDED.
Other Precautions:WASH HANDS AFTER HANDLING. KEEP OUT OF REACH OF SMALL
CHILDREN.

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:NONE
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NONE
Work Hygienic Practices:OBSERVE GOOD INDUSTRIAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES.
Supplemental Safety and Health
KEY1:N1. KIT CONSISTS OF GUTTA PERCHA (PNI: A), GUTTA PERCHA POINTS
(PNI: B), DENSFIL OBUTURATORS, TITANIUM WIRE CORE (PNI: C), DENSFIL
PLASTIC OBTURATORS, SIZES 25 TO 40 (PNI: D) OR DENSFIL PLASTIC O
BTURATORS, SIZES 45-160.

HCC:N1
NRC/State Lic Num:NOT RELEVANT
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVANT
Solubility in Water:NONE
Appearance and Odor:SOLID MATERIAL

Stability Indicator/Materials to Avoid:YES

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
WITH LOCAL, STATE AND FEDERAL REGULATIONS. THIS PRODUCT IS NOT A
HAZARDOUS WASTE UNDER EPA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.